:	May 10, 2004

:

The clutch release bearing is is included with the slave cylinder assembly.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the transmission.

.

: Always plug any open connections to prevent contamination. :   Position cloth to collect fluid spillage. Remove the fluid pipe.   Remove the clip.   Remove the bolt.   Remove the clamp.   Remove and discard the O-ring seal.

.

Remove the clutch slave cylinder and release bearing assembly.   Remove the 3 bolts.

.

Install the clutch slave cylinder and release bearing assembly.   Clean the component mating faces.   Tighten the bolts to 10 Nm (7 lb.ft).

.

Install the fluid pipe.   Clean the component mating faces.   Install a new O-ring seal.   Install the clip.   Install the clamp.   Tighten the bolt to 10 Nm (7 lb.ft).

.

Install the transmission.